The Sundström SR 700 is a specialized,
ultra-lightweight powered air-purifying respirator designed exclusively for
protection against hazardous particles. As a more compact and economical
alternative to the versatile SR 500, the SR 700 is the ideal
choice for long shifts in dust-intensive environments where gas protection is
not required. It provides a constant flow of filtered air, effectively
eliminating breathing resistance and reducing heat stress for workers in
demanding conditions.
Key Features:
- Ultralight
& Ergonomic: Weighing only 1.1 kg (including battery and filters),
it is one of the lightest PAPR units on the market, significantly reducing
user fatigue.
- High-Efficiency
Particle Filtration: Equipped with twin P3 R particle filters capable
of stopping 99.997% of particles, including silica dust, asbestos fibres,
lead dust, and biological hazards.
- IP67-Rated
for Decontamination: The unit is fully dust-tight and waterproof,
allowing it to be worn through decontamination showers or used in wet
demolition environments.
- Dual
Airflow Modes: Choose between a standard 175 L/min flow or a 225 L/min
boost mode to maintain comfort during physically intensive tasks.
- Intelligent
Safety Alerts: Features a single-button operation with clear visual
and audible alarms for low battery, clogged filters, or airflow
obstruction.
Technical Specifications:
|
Feature |
Details |
|
Airflow Rates |
175 L/min (Normal) / 225 L/min (Boost) |
|
Ingress Protection |
IP67 (Waterproof & Dust-tight) |
|
Battery Life |
Up to 8 hours with Heavy Duty battery; ~6 hours with
Standard |
|
Charge Time |
Approximately 2 hours for a full charge |
|
Weight |
~1.1 kg (Fan unit with standard battery and filters) |
|
Standards |
Certified to AS/NZS 1716:2012 |
Perfect For:
The Sundström SR 700 is highly recommended for
professionals involved in:
- Asbestos
Removal: Specifically for dust-only phases and wet decontamination.
- Silica
Dust Protection: Ideal for concrete cutting, grinding, and masonry
work.
- Demolition:
Durable enough for high-impact construction environments.
- Woodworking
& Sanding: Provides cool, filtered air for extended shop work.
Important Note:
The SR 700 is designed for particles only and cannot be fitted with gas filters. For protection against organic vapours, chemical gases, or spray painting, please refer to the Sundström SR 500PAPR.
All fan units come with 2 x SR510 Particle Filters, 10 x SR221 Pre-Filters, 2 x Filter Adaptors and 2 x Pre-Filter Holders
Sundstrom SR700 Particle PAPR Fan Unit
-
See more products from this supplier
- Product Code: 23060019005666 / 6007 / 6482
- Availability: In Stock
- $1,737.75
- Ex Tax: $1,579.77
Sundstrom SR100 Silicon Half Mask
The Sundstrom SR100 Half Mask is a high-performance, reusable respirator designed for demanding and long-duration work in harsh environments. Made from a soft, medical-grade, non-allergenic silicone, it offers a superior level of comfort and a secure fit for extended wear compared to masks made from harder materials. Key Features and Specifications Premium Material: The mask is constructed from hypoallergenic silicone, ensuring comfort against the skin and minimizing the risk of contact allergies. It can be easily cleaned and has a long service life. Superior Facial Seal: Designed with a deep chin cup and a broad nose rim, the SR100 ensures an optimal and secure fit for maximum protection. It is available in three sizes (S/M, M/L, L/XL) to suit a wide variety of face shapes. Low Breathing Resistance: The inclusion of two large exhalation valves reduces breathing resistance to a minimum, significantly lowering user fatigue during physically demanding work. Easily Adjustable Harness: The elastic, easily adjustable head harness features a large crown plate to provide a comfortable and secure fit without creating uncomfortable pressure points. Modular System Compatibility: The SR100 is fully compatible with the entire range of Sundstrom's Class 1 and Class 2 filters (gas, particle, and combination). This allows users to adapt their respiratory protection to specific workplace hazards quickly and cost-effectively. Versatile Use: It can be used as a negative pressure mask with filters or easily upgraded for use with the Sundstrom SR500 or SR700 Powered Air Purifying Respirator (PAPR) systems. Standards and Approvals: The SR100 is fully certified to the Australian/New Zealand Standard AS/NZS 1716:2012. Included Accessories: Each mask is supplied with a pre-filter, pr..
$112.84 Ex Tax: $102.58
Sundstrom SR510 P3 Particle Filter
The Sundstrom SR510 P3 Particle Filter is a high-performance, reusable (R) filter that offers maximum protection against all types of wet and dry particulate pollutants, including dust, asbestos, smoke, aerosols, bacteria, viruses, and mould. Designed with exceptionally low breathing resistance, it ensures comfort and safety for extended use in demanding industrial environments. Key Features and Specifications High Filtration Efficiency: The filter captures at least 99.997% of airborne particles, as tested by INSPEC against paraffin oil aerosol. Broad Spectrum Protection: Effective against all kinds of particles, including silica dust, asbestos fibres, smoke, mists, bacteria, and viruses. Compatibility: It integrates seamlessly into the Sundstrom modular system, fitting all Sundstrom half masks (SR100, SR900), full face masks (SR200), and powered air purifying respirators (SR500/SR700 fan units). Combination Use: The SR510 can be easily combined with a Sundstrom gas filter (e.g., for ABEK1 protection) to create a single, combined filter for environments with both gas and particle hazards, such as during spray painting. Extended Life: The filters life can be significantly extended by using it with the low-cost, daily-replaceable Sundstrom SR221 Pre-Filter, which sorts out coarse particles. Reusable (R) Classification: The 'R' designation means it is intended for use over more than a single shift, offering a cost-effective safety solution. Durable Construction: Made from plastic polypropylene with no metal parts and a hydrophobic fibreglass filter media, it is built to withstand tough industrial conditions. Standards: It is certified to Australian/New Zealand Standard AS/NZS 1716:2012. Technical Data Material: Plastic polypropylene, no metal..
$30.32 Ex Tax: $27.56
Sundstrom SR221 Pre-Filter - Pack of 5
The Sundstrom SR221 Pre-Filter is an essential and low-cost accessory designed to significantly extend the life and efficiency of your main gas or particle filters within the Sundstrom respiratory protection system. Key Features and Function: Extended Filter Life: The primary purpose of the SR221 pre-filter is to physically capture larger dust, mist, and coarse particles before they reach the main filter. This preventative action keeps the main filter clean and ensures its particulate filtration media or gas absorption capacity is used more efficiently and lasts longer. Cost-Effective Maintenance: By using these inexpensive, disposable pre-filters and replacing them regularly (often daily or per shift), you reduce the frequency of needing to replace the more expensive main P3 particle filters or combination filters. Broad Compatibility: The SR221 is designed to be universally compatible with all gas and particle filters in the Sundstrom range (e.g., SR510 P3 filter, ABEK1 filters). Easy Integration: It is easily secured over the top of the primary filter using the specific Sundstrom Pre-filter Holder, a simple plastic ring mechanism. Construction: Made from high-quality polyester fibre, it is designed for daily use and disposal. Standards: It meets the relevant preliminary filtration requirements when used in the Sundstrom system. How to Use:The pre-filter is placed on top of the main filter and secured by the pre-filter holder. This simple step is vital for protecting your primary safety equipment investment and ensuring optimal performance in dusty or misty environments. ..
$5.34 Ex Tax: $4.85
Sundstrom Pre-Filter Holder
The Sundstrom Pre-filter Holder is a simple yet essential component designed to secure the SR221 Pre-filter onto your main respiratory filters. It acts as the final piece of the modular assembly, ensuring your primary filters are protected from coarse dust and debris. Key Features and Function: Secure Attachment: Specifically engineered to snap firmly over Sundstrom gas and particle filters, keeping the pre-filter perfectly positioned for maximum coverage. Universal Compatibility: This holder is compatible with the entire range of Sundstrom filters, including the SR510 P3 Particle Filter and all gas/combination filters used with the SR100, SR200, and SR500 systems. Durable Design: Manufactured from high-quality, lightweight plastic that is built to withstand industrial use while remaining easy to snap on and off for quick pre-filter changes. Essential for Filter Longevity: By holding the pre-filter in place, it ensures that larger particles are trapped before they reach the more expensive main filter, preventing premature clogging and lowering your overall equipment costs. Easy Maintenance: The smooth plastic surface is easy to wipe clean or wash, ensuring your respirator assembly remains hygienic and functional. How to Use: Place the SR221 Pre-filter onto the face of your main gas or particle filter. Press the Pre-filter Holder over the top until it clicks into place. Ensure the holder is firmly seated to prevent any bypass of coarse dust around the edges. Using the pre-filter holder as part of the respiratory assembly helps maintain the efficiency of the filtration system. It is a standard component for those utilizing Sundstrom respiratory protection to help manage the performance and service life of their primary filters. ..
$7.98 Ex Tax: $7.25
Sundstrom SR200 Full Face Respirator
The Sundstrom SR200 Full Face Respirator offers a premium, high-protection solution designed for heavy-duty and continuous work in hazardous environments. Engineered to combine respiratory protection with integrated eye and face safety, this mask is a superior choice over standard half masks for severe conditions. Key Features and Protection: Integrated Eye and Face Protection: The full face design eliminates the need for separate safety glasses, protecting the user's eyes from gas, vapours, and high-impact particles. Wide Field of Vision: It features a unique, large, curved visor made from highly scratch-resistant polycarbonate (or laminated glass option) that ensures an exceptionally wide, unobstructed field of vision. Superior Comfort and Seal: Made from soft, non-allergenic silicone, the mask body conforms comfortably to the face, providing a reliable and secure facial seal. Low Breathing Resistance: Equipped with two dual-flow exhalation valves that minimize breathing resistance, reducing wearer fatigue even during extended use. Adjustable Fabric Harness: The easily adjustable, comfortable fabric head harness ensures a secure fit without creating pressure points. Airflow Management: The internal airflow channels hot and humid exhaled air out across the inside of the visor to prevent fogging. Compatibility and Standards: Modular Versatility: The SR200 mask is the central piece of the modular Sundstrom system. It is compatible with the entire range of Sundstrom's Class 1 and Class 2 filters (gas, particle, and combination filters). System Integration: It can be easily adapted for use with the Sundstrom SR500 or SR700 Powered Air Purifying Respirator (PAPR) systems, or connected to a continuous flow compressed air supply. Safety Compliance: Fully certified to th..
$547.04 Ex Tax: $497.31
Sundstrom SR100 Pro Kit
The Sundstrom SR100 Pro Kit offers a comprehensive, all-in-one respiratory protection solution designed for maximum safety across a wide variety of industrial environments. This professional-grade kit combines the exceptional comfort and durability of the premium SR100 half mask with versatile filtration options for both gas and particle hazards, all housed in a sturdy, reusable storage box. Kit Contents: The SR100 Pro Kit is designed to protect against a broad spectrum of common workplace contaminants: 1 x Sundstrom SR100 Half Mask: A non-allergenic, soft silicone mask that provides a superior facial seal, low breathing resistance, and comfort for extended wear. 1 x Sundstrom SR510 P3 Particle Filter: A high-efficiency filter (99.997% capture rate) for protection against dust, mists, asbestos, silica, bacteria, and viruses. 1 x Sundstrom SR315 ABE1 Gas Filter: A versatile combination filter providing protection against organic, inorganic and acidic gases/vapours. 5 x Sundstrom SR221 Pre-filters: Low-cost, disposable filters that extend the life of the primary P3 and ABE1 filters by capturing coarse particles. 1 x Sundstrom Pre-Filter Holder: A durable plastic clip to secure the pre-filters in place. 1 x Sundstrom Half Mask Storage Box: A robust container for hygienic storage and secure transport of the mask and all components. Instruction Manual & ID Tag: Provides essential information on use, maintenance, and safety compliance. Key Features: Versatile Protection: The inclusion of both P3 and ABE1 filters makes this kit suitable for a vast range of applications, from construction and demolition to chemical handling and spray painting. Premium Comfort: The SR100 mask is highly regarded for its ergonomic design and soft silicone material, ensuring comfort and re..
$192.18 Ex Tax: $174.71
Sundstrom SR900 TPE Half Mask
The Sundstrom SR900 Half Mask is a lightweight, ergonomic respirator made from Thermoplastic Elastomer (TPE) that offers superior fit and a high level of protection for a variety of work environments. It is a highly versatile component of the modular Sundstrom system, allowing configuration for use with filters, powered air purifying respirators (PAPR), or supplied air. Key Features and Specifications: Material: The mask body is made from double-molded TPE (thermoplastic elastomer) and polypropylene (PP), materials that are FDA-approved for food contact, which minimizes the risk of contact allergies. Superior Fit and Comfort: Features a deep chin cup and broad nose rim to ensure a secure, comfortable facial seal. It is available in three sizes (S, M, and L) for an optimal fit for different face shapes. Low Breathing Resistance: Equipped with two exhalation valves that provide very low breathing resistance, reducing wearer fatigue during prolonged use. New valve caps feature air diffusion to help prevent clogging during spray painting jobs. Adjustable Head Harness: The easily adjustable elastic head harness straps are V-shaped and have a large crown plate, contributing to a comfortable and secure fit. Modular System Functionality: The SR900 is designed as a customizable system: Filter Compatibility: It accepts all non-threaded Sundstrom Class I and Class II filters (gas, particle, and combination). Remote Filter Option: A unique feature is the detachable filter holder, which allows for a direct hose connection to a remote, waist-mounted filter holder, providing greater freedom of movement and making it ideal for use under welding hoods or face shields. PAPR/Supplied Air: It can be easily configured for use with Sundstrom SR500 or SR700 fan units, or connected t..
$105.42 Ex Tax: $95.84
Sundstrom SR217 Organic Gas Filter (A1)
The Sundstrom SR217 Organic Gas Filter is a Class A1 filter designed to protect against organic gases and vapours with boiling points above +65°C, such as various solvents. This filter is part of Sundstrom's modular respiratory protection system and is compatible with their Half Masks (e.g., SR100, SR900) and Full-Face Masks (e.g., SR200), as well as the SR500 PAPR system with an adapter. Key Features and Specifications Protection Type: Type A, Class 1 (regular capacity) for protection against organic gases and vapours with a boiling point > +65°C. Materials: The filter is constructed from plastic polypropylene and contains approximately 70-78g of activated carbon for optimized adsorption. It has no metal parts. Compatibility: It easily combines with the Sundstrom SR510 P3 Particle Filter to provide combined protection against both gases and aerosols (particles), ideal for applications like spray painting. Low Breathing Resistance: The filter features low pressure drop, ensuring comfortable breathing even during extended use. Standards: It is certified to Australian/New Zealand Standard AS/NZS 1716:2012. Physical Data: Largest diameter: 106 mm. Thickness: 28 mm. Weight: 113 g. Shelf Life: When stored in a clean, dry place with the seal unbroken, it has a shelf life of 5 years (check the expiry date on the product). Once opened and after use in contaminated air, it should be stored in an airtight container to maximize its lifespan. This filter offers a dependable and versatile solution for professionals requiring protection in environments with organic gas and vapour hazards. ..
$31.75 Ex Tax: $28.86
Sundstrom SR316 Ammonia Filter (K1)
The Sundstrom SR316 K1 Gas Filter provides reliable respiratory protection against ammonia and certain amines, such as ethylene diamine. It is a Class 1 filter, suitable for use with all Sundstrom half masks and full face masks, and offers the option for combined particle protection. Product Details Protection Type: Type K, Class 1 (regular capacity) for protection against ammonia vapour and organic amines. Compatibility: Designed to fit seamlessly with the Sundstrom modular system, including the SR100 and SR900 series half masks, and the SR200 full face mask. It can also be used in pairs with the SR500 Powered Air Purifying Respirator (PAPR) via an adapter. Combination Filtration: For environments with both gas and particle hazards (e.g., during high-pressure washing), the SR316 filter can be easily combined with the Sundstrom SR510 P3 R Particle Filter. Performance: In tests with 1,000 ppm ammonia at a flow of 30 l/min, the filter's adsorption capacity significantly exceeds the standard requirement (>50 minutes), lasting between 60 to 90 minutes. Materials: The filter is made from durable plastic polypropylene and contains no metal parts. It holds 80g of activated carbon. Standards: It is certified to Australian/New Zealand Standard AS/NZS 1716:2012. Storage and Shelf Life: When stored sealed in a clean, dry place at room temperature, the filter has a shelf life of 5 years. Once opened and used, store it in an airtight container away from contaminants to maximise its lifespan. ..
$39.61 Ex Tax: $36.01
Sundstrom SR315 Gas Filter (ABE1)
The Sundstrom SR315 ABE1 Gas Filter is a versatile, multi-purpose filter designed to protect against a combination of organic, inorganic, and acidic gases and vapours. It provides a Class 1 (regular capacity) level of protection and is fully compatible with the entire range of Sundstrom half masks, full face masks, and powered air purifying respirators (PAPR). Key Features and Protection: Type A Protection: Guards against organic gases and vapours, such as solvents, with boiling points above +65°C. Type B Protection: Defends against inorganic gases and vapours, including chlorine, hydrogen sulphide, and hydrogen cyanide. Type E Protection: Offers protection from acidic gases and vapours like sulphur dioxide and hydrogen fluoride. Versatile Compatibility: This filter is suitable for use with all Sundstrom face masks, including the Sundstrom SR100 Half Mask, Sundstrom SR200 Full Face Mask, and the Sundstrom SR500 PAPR system (using an adapter). Combination Use: The filter can be easily combined with the Sundstrom SR510 P3 Particle Filter to provide comprehensive protection against both gases/vapours and aerosols (particles), a common requirement for tasks like spray painting or working with asbestos. Specifications: Attribute Detail Material Plastic polypropylene (no metal parts) Weight 125 g Dimensions Largest diameter: 106 mm; Thickness: 28 mm Activated Carbon Content 78 g Standards Approved to AS/NZS 1716:2012 Shelf Life 5 years when stored with the seal unbroken The SR315 ABE1 filter is a reliable and flexible solution for workers across various ..
$40.68 Ex Tax: $36.98
Sundstrom SR295 Gas Filter (K2)
The Sundstrom SR295 K2 Gas Filter is a high-capacity filter (Class 2) specifically designed to protect against ammonia vapour and certain organic amines, such as ethylene diamine. This filter provides enhanced protection capacity compared to a K1 filter, making it suitable for environments with higher concentrations of these contaminants or for extended use.Key Features and Protection: High Capacity (K2): The K2 classification signifies a high capacity for absorbing ammonia and amines, exceeding the minimum standard requirements in testing. Targeted Protection: Type K protects specifically against ammonia and certain organic amines, commonly found in industrial and agricultural settings. Broad Compatibility: The SR295 filter fits all Sundstrom negative pressure half masks and full face masks, including the popular Sundstrom SR100 Half Mask and Sundstrom SR200 Full Face Mask. It can also be used with the Sundstrom SR500 PAPR system using an adapter. Combination Use: The filter can be easily combined with the Sundstrom SR510 P3 Particle Filter to provide comprehensive protection against both gases/vapours and aerosols (particles), for example, during high-pressure washing applications. Durable Construction: Made from plastic polypropylene with no metal parts, it contains a significant amount of activated carbon (approx. 166g) for effective adsorption. Standards: It is certified to Australian/New Zealand Standard AS/NZS 1716:2012 and EN 14387:2004 + A1:2008 standards. Technical Specifications: Attribute Detail Material Plastic polypropylene, no metal parts Weight 235 g Dimensions Largest diameter: 106 mm; Thickness: 48 mm Activated Carbon Cont..
$56.49 Ex Tax: $51.35
Sundstrom SR294 Gas Filter (A2B2E1)
The Sundstrom SR294 A2B2E1 Gas Filter is a high-capacity, multi-purpose filter designed to provide comprehensive respiratory protection against organic, inorganic, and acidic gases and vapours. This filter offers high-level (Class 2 for A and B types) protection and is a key component of the modular Sundstrom safety system, compatible with all Sundstrom half masks and full face masks. Key Features and Protection: The A2B2E1 rating signifies protection against the following classes of hazards: Type A (Class 2): Protects against organic gases and vapours, such as various solvents, with boiling points above +65°C. This is a higher capacity than A1 filters. Type B (Class 2): Defends against inorganic gases and vapours, including chlorine, hydrogen sulphide, and hydrogen cyanide. This is a higher capacity than B1 filters. Type E (Class 1): Offers protection from acidic gases and vapours like sulphur dioxide and hydrogen fluoride. Compatibility and Standards: Versatile Fit: Compatible with all Sundstrom negative pressure half masks (e.g., Sundstrom SR100, SR900) and full face masks (Sundstrom SR200). It can also be used with the Sundstrom SR500 Powered Air Purifying Respirator (PAPR) when using an adapter. Combined Protection: For environments with both gas and particle hazards (e.g., spray painting), the SR294 filter can be easily combined with the high-efficiency Sundstrom SR510 P3 Particle Filter. Using a low-cost Sundstrom SR221 Pre-Filter is also recommended to extend the life of the main filter. Compliance: It is certified to Australian/New Zealand Standard AS/NZS 1716:2012 and EN 14387:2004 + A1:2008 standards. Technical Specifications: Attribute Detail Material Impregnated activated carb..
$63.48 Ex Tax: $57.71
Sundstrom SR299-2 Gas/Particle Filter (ABEK1HgP3)
The Sundstrom SR299-2 ABEK1HgP3 Gas/Particle Filter is a high-performance combination filter that offers comprehensive protection against a wide spectrum of gases, vapours, and all types of particulate hazards, including mercury vapour. It is a modular component designed for use with all Sundstrom half masks and full face masks. Key Features and Protection: The filter is classified as Type ABEK1-Hg-P3 R, providing protection against the following: Type A (Class 1): Protects against organic gases and vapours, such as solvents, with boiling points above +65°C. Type B (Class 1): Defends against inorganic gases and vapours, including chlorine, hydrogen sulphide, and hydrogen cyanide. Type E (Class 1): Offers protection from acidic gases and vapours like sulphur dioxide and hydrogen fluoride. Type K (Class 1): Guards against ammonia and certain organic amines. Type Hg: Provides specific protection against mercury vapour, with a maximum recommended usage time of 50 hours. Type P3 R (Reusable Class 3): Offers high-efficiency (99.997%) protection against all types of particulate pollutants, including dust, mist, smoke, fumes, bacteria, viruses, and mould. Compatibility and Standards: Versatile Fit: Compatible with all Sundstrom negative pressure half masks (e.g., Sundstrom SR100) and full face masks (Sundstrom SR200). Compliance: It is certified to Australian/New Zealand Standard AS/NZS 1716:2012 as well as European standards EN 14387:2004 + A1:2008 and EN 143:2000+A1:2006. Technical Specifications: Attribute Detail Material Plastic polypropylene, no metal parts Weight Approx. 200 g Dimensions Diameter: ..
$100.05 Ex Tax: $90.95
Sundstrom SR298 Organic Gas Filter (A2AX)
The Sundstrom SR298 A2AX Gas Filter is a high-capacity organic gas and vapour filter that provides specialized protection against low-boiling point organic compounds (boiling point ≤ +65°C), as well as standard organic vapours with boiling points above +65°C. It is an integral component of the modular Sundstrom safety system and is compatible with their range of half masks and full face masks. Key Features and Protection: Type A2 Protection: High capacity protection against organic gases and vapours with a boiling point above +65°C, such as certain solvents. Type AX Protection: Protection against organic gases and vapours with a boiling point at or below +65°C, such as acetone, methanol, and dichloromethane. Single-Use Requirement for AX: When used for protection against low-boiling AX compounds, the filter is for single use only and must be discarded after 8 hours of use, or sooner depending on contaminant concentration. Broad Compatibility: Designed to fit all Sundstrom half masks (e.g., Sundstrom SR100, SR900) and full face masks (Sundstrom SR200). Two filters can be used with the SR500 PAPR system via an adapter. Combination Filtration: For combined protection against gases and aerosols (particles), the SR298 filter can be easily combined with the high-efficiency Sundstrom SR510 P3 Particle Filter. Technical Specifications: Attribute Detail Material Plastic polypropylene; no metal parts Weight 145 g Dimensions Diameter: 106 mm; Thickness: 48 mm Activated Carbon Content 145 g Standards Approved to AS/NZS 1716:2012 and EN 14387:2004 + A1:2008 Shelf Life 5 years when s..
$54.19 Ex Tax: $49.26
Sundstrom SR710 P3 Particle Filter
The Sundström SR 710 is a high-efficiency P3 R particle filter designed for use with Sundström powered air-purifying respirators (PAPR). Engineered to provide maximum protection against all types of wet and dry particles, this filter is a critical component for workers facing hazardous dust, mists, and fibres in industrial environments. When fitted to the SR 500 or SR 700 fan units, the SR 710 delivers a 99.997% filtration efficiency, making it the gold standard for high-risk applications such as asbestos removal and silica dust mitigation. Key Features: Extreme Filtration Efficiency: Certified as a P3 R filter, it captures 99.997% of airborne particles, including dust, smoke, pollen, bacteria, and viruses. Large Surface Area: Designed with a high-capacity pleated medium to ensure exceptionally low breathing resistance and a long service life. R (Reusable) Rating: The "R" classification means the filter can be used for more than one single work shift, providing excellent cost-effectiveness. Easy Installation: Features a simple, secure fitment for Sundström PAPR fan units, ensuring a leak-proof seal every time. Rugged Protection: Housed in a durable casing that protects the filter media from mechanical damage during heavy-duty site work. Technical Specifications: Feature Details Filter Type P3 R (Particle Filter) Efficiency >99.997% Compatibility Sundström SR 500 & SR 700 PAPR Units Standards AS/NZS 1716:2012 & EN 12941/EN 12942 Weight ~45g Common Applications: The SR 710 is the primary choice for customers working in: Asbestos Abatement: Essential for all stages of asbestos removal and ..
$35.60 Ex Tax: $32.36
New
Sundstrom SR700 / SR200 PAPR Kit with SR550 Hose
This high-performance respiratory kit combines the ultralight Sundström SR 700 Fan Unit with the industry-leading SR 200 Full Face Mask, creating a specialized solution for environments where extreme particle protection and user comfort are non-negotiable. Kit Overview: This comprehensive bundle is specifically engineered for particles-only protection, making it the ideal choice for heavy-duty tasks such as asbestos removal, silica dust mitigation, and dusty demolition work. By utilizing a powered fan, the system delivers a constant flow of filtered air, significantly reducing breathing resistance and heat buildup compared to standard negative-pressure respirators. Key Components: Sundström SR 700 Fan Unit (Standard Battery) Ultralight Performance: Weighing only 1.1 kg, it is one of the lightest PAPR units available, minimizing fatigue during long shifts. Dual Airflow Settings: Switch between 175 L/min and a 225 L/min boost mode for high-intensity work. Reliable Power: The standard Lithium-ion battery provides up to 6–8 hours of continuous operation on a single 2-hour charge. IP67 Rated: Fully dust-tight and waterproof, allowing for safe use in wet environments and easy decontamination. Sundström SR 200 Full Face Mask Superior Visibility: Features a unique curved, scratch-resistant polycarbonate visor that provides an exceptionally wide and deep field of vision. Premium Comfort: Constructed from high-quality, non-allergenic silicone with a fabric harness for a secure, non-sticky fit. Anti-Fog Design: Inhalation airflow is channeled across the visor to prevent misting, ensuring clear vision at all times. Very High Protection: Offers a Nominal Protection Factor (NPF) of 2,..
$2,197.00 Ex Tax: $1,997.27
New
Sundstrom SR700 / SR520 Powered Air Starter Pack
This Sundström SR 700 / SR 520 Powered Air Starter Pack is a lightweight, ultra-portable respiratory solution designed for workers who require high-level particle protection without the weight or restriction of a full-face mask. By combining the compact SR 700 Fan Unit with the short-style SR 520 Hood, this kit offers an ideal balance of safety, visibility, and "cool-air" comfort. The SR 520 "Short Hood" Advantage: Unlike the longer SR 530 hood, the SR 520 features a shorter design that provides excellent respiratory protection while allowing for maximum freedom of movement around the shoulders and neck. It is particularly popular in laboratories, food processing, and light industrial assembly where a full neck-and-shoulder drape isn't required. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Featherweight Protection: At just 1.1kg, the SR 700 is designed to be worn all day without back strain. Dual-Speed Airflow: Choose between 175 L/min for standard tasks or 225 L/min for high-exertion work. Automatic Flow Control: The unit monitors and maintains the selected airflow regardless of filter saturation or battery level. IP67 Durability: Dust-tight and waterproof, making the fan unit easy to decontaminate and safe for use in wet environments. Sundström SR 520 Lightweight Short Hood (M/L size only in this pack) Superior Visibility: The wide, scratch-resistant visor provides an unhindered field of view for precision tasks. Comfortable Fit: An easily adjustable head harness and soft face seal ensure a secure fit for all users, including those with facial hair. Positive Pressure Cooling: Filtered air is directed into the hood to prevent fogging and keep the user cool during long shifts. TH3..
$1,904.58 Ex Tax: $1,731.44
New
Sundstrom SR700 / SR200 PAPR Asbestos Kit
The Sundström SR 700/200 Asbestos Kit is a purpose-built, high-performance respiratory system specifically configured for the rigorous demands of the asbestos removal industry. Every component in this kit has been selected for its ability to withstand the harsh decontamination protocols required when working with H-Class hazardous dust. Engineered for the Asbestos Industry: Unlike standard kits, the Asbestos Kit features specialized rubber components instead of traditional fabric or plastic. This is critical for asbestos remediation, as smooth rubber surfaces do not trap microscopic fibers and can be thoroughly wiped down or submerged during the decontamination process without degrading. What’s in the Kit? Sundström SR 700 Fan Unit (Standard Battery) Lightweight & Compact: At just 1.1kg, it reduces the physical burden on operators working in confined spaces or overhead. Constant Flow Technology: Automatically maintains a steady airflow of 175 L/min or 225 L/min, even as filters become laden with dust. IP67 Rated: The fan unit is completely dust-tight and waterproof, allowing for safe immersion and easier cleaning after exposure. Sundström SR 200 Full Face Mask with Rubber Head Harness Decon-Ready Harness: The specialized rubber head harness replaces the standard fabric version, ensuring no fibers are trapped in the mask assembly during the "decon" phase. Maximized Vision: A high-impact polycarbonate visor provides a 180° field of view, essential for navigating hazardous worksites. Optimal Seal: The high-grade silicone facepiece ensures a leak-proof fit for maximum protection factors. Sundström SR 551 Rubber Hose Industrial Strength: A heavy-duty, reinforced rubber hose de..
$2,183.73 Ex Tax: $1,985.21
New
Sundstrom SR700 / SR 530 Ready-to-Work Pack
The Sundström SR 700 / SR 530 Ready-to-Work Pack is a lightweight, high-performance powered air-purifying respirator (PAPR) system designed for maximum comfort in dusty or liquid-spray environments. By pairing the ultra-compact SR 700 Particle Fan Unit with the versatile SR 530 Hood, this kit provides a "positive pressure" airflow that makes breathing effortless while protecting the face and neck. The Positive Pressure Advantage: Unlike traditional masks that require your lungs to pull air through a filter, the SR 700 fan unit does the work for you. This creates a constant flow of cool, filtered air inside the hood, preventing heat buildup and fogging. It is the perfect solution for users with facial hair or those who find traditional close-fitting masks restrictive. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Lightweight Power: One of the smallest and lightest units on the market, weighing just 1.1kg. Simple Operation: Single-button control with two airflow settings (175 L/min and 225 L/min boost). Durable & Waterproof: Rated IP67, meaning the unit is dust-tight and can be submerged for easy cleaning and decontamination. Reliable Battery: The Lithium-ion battery provides approx. 6–8 hours of runtime and features a fast-charge cycle. Sundström SR 530 Lightweight Hood Full Coverage: Protects the respiratory organs, face, and the crown of the head. Comfort Fit: Features an easily adjustable neck seal and head harness, ensuring a secure fit for all head shapes. Facial Hair Friendly: Because it is a loose-fitting hood, it does not require a "clean-shave" to provide full protection, unlike standard masks. Anti-Fog Airflow: The breathing hose connects to th..
$1,970.44 Ex Tax: $1,791.31
New
Sundstrom SR700 / SR570 Powered Air Shield Pack
The Sundström SR 700 / SR 570 Powered Air Shield Pack is a premium, versatile respiratory solution designed for heavy-duty industrial applications where combined face and respiratory protection is a priority. By pairing the ultra-lightweight SR 700 Particle Fan Unit with the advanced SR 570 Face Shield, this kit provides a constant flow of filtered air while guarding against impact, sparks, and splashes. The SR 570 Shield Advantage:The SR 570 is more than just a visor; it is a highly modular headtop designed for extreme comfort and customisation. It features a flip-up visor and is uniquely designed to accept a wide range of accessories, including hearing protection, peel-off visors, and specialized neck covers, making it the most adaptable shield in the Sundström range. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Lightweight Endurance: Weighing only 1.1kg, the SR 700 reduces wearer fatigue during long shifts. Intelligent Flow Control: Automatically adjusts power to maintain a constant airflow (175 or 225 L/min), even as the filters clog. IP67 Durability: The unit is completely dust-tight and waterproof, allowing for safe submersion and thorough cleaning. Rapid Charge Battery: The Lithium-ion battery provides 6–8 hours of runtime and features a quick-charge cycle. Sundström SR 570 Face Shield High-Impact Vision: The large, clear visor is rated for high-impact protection and provides a wide, undistorted field of view. Exceptional Comfort: Features a fully adjustable head harness and a balanced design that sits comfortably on the head without pressure points. Modular Design: Easily attach earmuffs or welding shields (sold separately) to create a multi-task safety system. Breathable Design: ..
$2,419.66 Ex Tax: $2,199.69
New
Sundstrom SR700 / SR580 Powered Air Helmet Pack
The Sundström SR 700 / SR 580 Powered Air Helmet Pack is the ultimate "3-in-1" safety solution for high-risk industrial environments. By integrating the lightweight SR 700 Particle Fan Unit with the heavy-duty SR 580 Helmet, this kit provides simultaneous respiratory, head, and face protection without compromising on comfort or mobility. The SR 580 Multi-Protection Advantage: The SR 580 Helmet is designed for the toughest jobs. It replaces the need for separate pieces of safety gear by providing a certified safety helmet, a high-impact flip-up visor, and a TH3-rated respiratory connection. It is the gold standard for workers in construction, heavy manufacturing, and mining who require integrated head protection alongside their PAPR system. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Compact Power: Weighing just 1.1kg, the fan unit is designed to minimize the physical load on the wearer. Constant Flow Technology: Maintains a steady airflow of 175 L/min or 225 L/min, ensuring consistent protection even as the P3 filters collect dust. IP67 Durability: The unit is dust-tight and waterproof, allowing for safe submersion and thorough cleaning after a shift. Reliable Battery: The Lithium-ion battery offers 6–8 hours of runtime and features a fast-charge cycle. Sundström SR 580 Helmet with Visor Certified Head Protection: The helmet is tested and approved to industrial safety standards for falling objects. High-Impact Flip-Up Visor: The clear, wide-view visor can be flipped up when respiratory protection is not required, while the helmet remains in place. Positive Pressure Comfort: Filtered air is channeled into the helmet, creating a cool environment and preventing..
$2,485.30 Ex Tax: $2,259.36
New
Sundstrom SR700 / SR580 / SR584 Welding Helmet Pack
The Sundström SR 700 / SR 580 / SR 584 Welding Helmet Pack is a comprehensive, multi-hazard protection system designed for professional welders and metal fabricators. By integrating the lightweight SR 700 Particle Fan Unit with the heavy-duty SR 580 Helmet and the specialized SR 584 Welding Shield, this kit provides simultaneous protection for your lungs, head, eyes, and face in one streamlined package. The Ultimate Welder’s Configuration: This kit is engineered to handle the unique challenges of the welding bay. While the SR 580 helmet provides industrial-grade head protection, the SR 584 attachment transforms it into a professional welding station. This "positive pressure" system ensures that hazardous welding fumes and ozone are pushed away from the breathing zone, replaced by a constant stream of cool, filtered air that prevents heat exhaustion and visor fogging. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Ultra-Lightweight: At just 1.1kg, it is one of the lightest units available, reducing strain during long fabrication shifts. Dual Airflow Settings: Switch between 175 L/min and a 225 L/min boost mode for high-intensity work. IP67 Durability: The unit is dust-tight and waterproof, making it easy to decontaminate after working in gritty environments. Sundström SR 580 Protective Helmet Certified Head Protection: A high-strength industrial safety helmet designed to protect against falling objects. Integrated Air Channeling: Delivers filtered air directly to the breathing zone for maximum comfort. Modular Foundation: Serves as the base for the welding shield, while also allowing for the attachment of earmuffs (sold separately). Sundström SR 584 Welding Shield Seamless ..
$2,872.01 Ex Tax: $2,610.92
New
Sundstrom SR700 / SR592 Powered Air Welding Pack
The Sundström SR 700 / SR 592 Powered Air Welding Pack is a specialized, lightweight respiratory solution designed for professional welders who require high-level fume protection without the need for an integrated hard hat. By pairing the ultra-compact SR 700 Particle Fan Unit with the streamlined SR 592 Welding Shield, this kit provides a constant flow of filtered air and professional-grade eye protection in a comfortable, balanced package. The SR 592 Welding Shield Advantage: The SR 592 is a dedicated welding headtop that offers a superior field of vision and a highly adjustable head harness for all-day comfort. Unlike helmet-based systems, this shield is designed to be lightweight and low-profile, making it the perfect choice for welders working in tight spaces or workshops where overhead head protection isn't a safety requirement. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Featherweight Performance: At just 1.1kg, the SR 700 reduces back and shoulder fatigue during long welding shifts. Intelligent Flow Control: Automatically monitors and maintains your selected airflow (175 L/min or 225 L/min), ensuring consistent protection as your P3 filters capture welding fumes. IP67 Durability: The unit is completely dust-tight and waterproof, allowing for easy cleaning and decontamination. Reliable Battery: The Lithium-ion battery provides 6–8 hours of continuous use with a fast-charge cycle. Sundström SR 592 Welding Shield Excellent Coverage: Protects the face, eyes, and ears from welding sparks and radiation. Adjustable Airflow: Directs filtered air across the visor to keep the user cool and prevent lens fogging. Customizable Protection: The flip-up visor is designed to acce..
$2,637.72 Ex Tax: $2,397.93
New
Sundstrom SR700 / SR900 Half Mask Pack with SR951 Hose
The Sundström SR 700 / SR 900 Half Mask Pack with SR951 Hose is a unique, hybrid respiratory solution that bridges the gap between traditional half masks and full-powered air systems. By pairing the ultra-lightweight SR 700 Particle Fan Unit with the professional-grade SR 900 Half Mask, this kit offers the elite protection of a PAPR with the low-profile maneuverability of a half mask. The "Positive Pressure" Half Mask Advantage: This kit is a game-changer for workers who prefer the compact fit of a half mask but want to eliminate "lung-power" breathing. The SR 700 fan unit does the heavy lifting, pushing a constant stream of filtered air through the SR 951 Single Hose and into the mask. This creates a positive pressure environment that makes breathing effortless and significantly reduces heat and moisture buildup inside the facepiece. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Featherweight Power: At just 1.1kg, it is designed for all-day comfort without causing back or shoulder strain. Intelligent Flow: Automatically maintains your chosen airflow (175 L/min or 225 L/min boost), ensuring consistent safety as filters capture dust. IP67 Durability: Completely dust-tight and waterproof, making the unit easy to decontaminate and safe for use in wet conditions. Fast-Charge Battery: The Lithium-ion battery provides 6–8 hours of runtime and reaches 80% charge in just 1.5 hours. Sundström SR 900 Half Mask (Medium only) Premium Silicone Seal: Crafted from high-grade, non-allergenic silicone that remains soft and flexible for a superior face seal. V-Shaped Head Harness: Distributes weight evenly across the head, preventing pressure points on the face during long shifts. Twin Exhalation Valves..
$1,898.69 Ex Tax: $1,726.08
New
Sundstrom SR700 / SR900 Half Mask Pack with SR952 Twin Hose
The Sundström SR 700 / SR 900 Half Mask Pack with SR952 Twin Hose is a high-performance, lightweight respiratory solution designed for workers who need the mobility of a half mask with the added safety of a dual-inlet airflow system. By pairing the ultra-compact SR 700 Particle Fan Unit with the professional-grade SR 900 Half Mask via the SR 952 Twin Hose, this kit provides a balanced and effortless breathing experience for physically demanding tasks. The Twin Hose Advantage: The standout feature of this configuration is the SR 952 Twin Hose. Unlike a single hose, the twin-hose design connects to both sides of the SR 900 mask. This ensures a more balanced weight distribution and provides a higher, more stable volume of filtered air directly to the breathing zone. This setup is ideal for high-exertion jobs where maximum "positive pressure" is needed to keep the user cool and protected. Kit Components: Sundström SR 700 Fan Unit (Standard Battery) Ultralight Endurance: Weighing only 1.1kg, it is designed for all-day comfort without causing back strain. Intelligent Airflow: Automatically maintains your selected flow (175 L/min or 225 L/min boost), regardless of filter saturation. IP67 Durability: Dust-tight and waterproof, allowing for safe submersion and thorough cleaning. Reliable Power: The Lithium-ion battery offers 6–8 hours of runtime and features a fast-charge cycle. Sundström SR 900 Half Mask (Medium or Large available) Superior Face Seal: Made from premium, non-allergenic silicone that remains soft and flexible for a reliable, airtight fit. Low Profile: The compact design fits easily under welding shields or safety visors. Balanced Harness: The V-shaped head harness ensures the mask stays ..
$1,996.58 Ex Tax: $1,815.07
