Male Adapter x Female BSP Thread
Our premium
Camlock Type A Adapter provides a rugged, leak-free connection for high-volume
liquid and dry bulk transfer across Australian industrial, mining, and
agricultural operations. Expertly engineered to adapt male camlock connections
directly to standard male pipelines or fittings.
Primary Australian Applications
Commonly used
in chemical processing plants, bulk tank dewatering, agricultural irrigation
systems, and industrial pump suction or discharge lines.
Key Performance Features
·
Precision Machined Threads: Standard BSP
female parallel threads ensuring seamless compatibility with Australian
pipework systems.
·
Heavy-Duty Construction: Available in
high-tensile aluminium. Contact us <here> if you require stainless steel,
brass, or other material options.
·
Optimised Fluid Dynamics: Smooth
internal bore minimises pressure drop, turbulent flow, and material
accumulation.
·
Interchangeability: Fully compliant with
A-A-59326D (Mil-Spec) international standards to guarantee safe coupling with
existing Type B, C, D, and DC couplers.
Technical Specifications
·
Working Pressure: Up to 1,720 kPa (250
PSI) based on size and material choice.
·
Temperature Spectrum: -20°C to +100°C
(elastomer gasket dependent).
·
Sizing Options: Complete range available
from 20mm (3/4") up to 125mm (5").
·
Thread Standard: AS ISO 7.1 / BSP female
parallel configurations.
The Polyplus Advantage
Unlike generic hardware imports that suffer from cross-threading and rapid groove wear, our Type A adapters undergo strict quality control to handle the demanding abrasive slurry and high-UV environments characteristic of Australian job sites.
Camlock Type A Adapter
Camlock Type B Coupler
Female Coupler x Male BSP Thread Our premium Camlock Type B Coupler delivers a rapid-action, ultra-secure connection for high-pressure industrial transfer hose assemblies. Designed with dual cam arms, it connects seamlessly to male Type A, F, or DP adapters, transitioning effortlessly into a male BSP threaded line. Primary Australian Applications Ideal for waste management tankers, petroleum transport, mining dewatering manifolds, and construction site water distribution lines. Key Performance Features · Ergonomic Cam Arms: Fitted with heavy-duty safety pins to prevent accidental uncoupling or blowouts under high vibration. · Robust Male Threads: Precision BSP tapered or parallel male threads engineered for high torque resistance during assembly installation. · Pre-Fitted Gaskets: Includes premium nitrile or viton sealing rings designed to withstand aggressive chemicals and heavy weathering. · Mil-Spec Compatibility: Manufactured in strict compliance with commercial A-A-59326D standards for universal field interchangeability. Technical Specifications · Working Pressure: Maximum rated operational pressure of 1,720 kPa (250 PSI). · Temperature Resilience: Optimal performance from -25°C to +120°C depending on seal compound. · Material Availability: Structural grade aluminium alloy. Contact us <here> if you require stainless steel, brass, or other material options. · Sizing Options: Complete range available from 20mm (3/4") up to 125mm (5"). · Thread Profile: Standard Aus..
$0.00 Ex Tax: $0.00
Camlock Type C Coupler
Female Coupler x Hose Tail / Shank The Polyplus Premium Camlock Type C Coupler stands as the industry standard for direct hose integration, featuring an advanced multi-serrated hose tail (shank). This female coupler enables swift attachment to any male camlock adapter, providing a rock-solid grip inside rubber or PVC suction and discharge hoses. Primary Australian Applications Extensively deployed in mobile water carts, municipal civil works, agricultural chemical spraying, and civil excavation pumping. Key Performance Features · Serrated Hose Shank: Multi-barb configuration ensures maximum hose retention and prevents hose blowouts when secured with punch cuffs or bolt clamps. · Heavy-Wall Cam Mechanism: Reinforced cam housings designed to take abuse from drop impacts on rocky Australian terrains. · Finger-Ring Safety Pins: Supplied with heavy-duty split rings and safety locking clips for mandatory on-site compliance. · Leak-Proof Seal Zone: Precision-moulded internal face gaskets block suction loss and fluid weeping. Technical Specifications · Pressure Threshold: Rated up to 1,720 kPa (250 PSI) relative to material compound and hose clamp limits. · Compatible Hose Inner Diameters: Available from 20mm (3/4") up to 125mm (5"). · Construction Materials: Premium Cast Aluminium. Contact us <here> if you require stainless steel, brass, or other material options. · Gasket Compatibility: Nitrile (standard), EPDM, Viton, and PTFE-encapsulated options. The Polyplus Advantage Our Type C hose tails feature a elongated ..
$0.00 Ex Tax: $0.00
Camlock Type D Coupler
Female Coupler x Female BSP Thread Our premium Camlock Type D Coupler provides a highly reliable, low-maintenance connection for fixed piping manifolds and modular fluid networks. This coupler features twin cam locks on one end and standard female BSP threads on the other, allowing it to screw directly onto permanent pipe installations or valves. Primary Australian Applications Utilised in factory fluid intake manifolds, fuel terminal transfer lines, bulk chemical storage vats, and processing facility pipe loops. Key Performance Features · Tapered Thread Lead-In: Smooth thread entry design prevents binding and ensures quick, flush installations with pipe sealant. · Impact-Resistant Handles: Ergonomically shaped stainless steel or brass cam handles that resist corrosion and operational bending. · Full Bore Configuration: Unrestricted fluid path maintains maximum delivery volume and pumping efficiency. · Global Interchangeability: Fully compatible with all Mil-Spec style male camlock adapters across the Australian marketplace. Technical Specifications · Maximum Pressure Rating: Up to 1,720 kPa (250 PSI) depending on size and chemical medium. · Operational Temperatures: Efficiently handles extremes from -30°C to +140°C (with premium Viton/PTFE seals). · Sizing Portfolio: Industry-standard configurations ranging from 20mm (3/4") to 125mm (5"). · Construction Materials: Premium Cast Aluminium. Contact us <here> if you require stainless steel, brass, or other material options. · &nb..
$0.00 Ex Tax: $0.00
Camlock Type DC Dust Cap
Female Coupler End Cap Our premium Camlock Type DC Dust Cap provides absolute seal protection for open male camlock adapters when pipelines or transport hoses are disconnected. Equipped with dual locking cam arms and an internal sealing face, this female end cap locks tightly over male adapters to prevent product spills, vapor loss, and line contamination. Primary Australian Applications Widely used to cap off chemical discharge pipes, fuel loading arms, bulk container outfeeds, and agricultural fertilizer manifolds. Key Performance Features · Dual Cam-Lock Security: Uses a twin-arm mechanical clamp to maintain compression against the adapter face, even under line vibration. · High-Grade Internal Gasket: Outfitted with heavy-duty elastomeric seals that resist permanent compression set and stay flexible over time. · Heavy-Duty Lanyard Connection: Features a dedicated anchor point to easily attach a security chain, preventing the cap from getting lost. · Ergonomic Finger Grips: Specially contoured handles allow operators wearing heavy safety gloves to clip or unclip the cap quickly. Technical Specifications · Pressure Guideline: Designed primarily for dust exclusion and static head pressure isolation. Not rated for active main pump pressures. · Size Distribution: Stocked across all primary industrial sizes from 20mm (3/4") to 125mm (5"). · Body Metallurgy/Composition: Lightweight Aluminium. Contact us <here> if you require stainless steel, brass, or other material options. · Standard Seal Material: Fuel and chemical-re..
$0.00 Ex Tax: $0.00
Camlock Type E Adapter
Male Adapter x Hose Tail / Shank Our premium Camlock Type E Adapter is engineered for rugged hose-to-hose extensions or pump delivery hose connections. Combining a precision-moulded male camlock interface with an extended, serrated hose tail shank, this adapter provides an unyielding connection point inside flexible pressure hoses. Primary Australian Applications Heavily utilized in slurry pumping, irrigation line extensions, heavy transport washdown bays, and site dewatering discharge assemblies. Key Performance Features · Engineered Hose Barbs: Specially spaced grooved barbs prevent hose slippage under heavy push-back pressures. · Machined Cam Face: Perfectly contoured seating groove minimizes wear on the mating female coupler gaskets, ensuring a tighter seal. · Anti-Galling Materials: Selection of high-finish materials prevents surface binding during frequent manual coupling cycles. · High Impact Tolerance: Built to survive rough handling on gravel, dirt, and heavy industrial workshop floors. Technical Specifications · Working Pressure Limit: 1,720 kPa (250 PSI) max rating for metallic units. · Sizing Options: Comprehensive Australian sizing index from 20mm to 125mm. · Material Lineup: High-yield Aluminium. Contact us <here> if you require stainless steel, brass, or other material options. · Testing Standards: Hydrostatically tested to comply with international A-A-59326D specifications. The Polyplus Advantage Our Type E adapters feature an elongated shank profile, giving heavy-duty spiral-wound hoses plenty of ..
$0.00 Ex Tax: $0.00
Camlock Type F Adapter
Male Adapter x Male BSP ThreadOur premium Camlock Type F Adapter allows you to seamlessly convert a standard female-threaded valve, pump outlet, or pipe manifold into a quick-connect male camlock terminal. Featuring a male camlock groove on one end and a male BSP thread on the opposite side, it is a crucial component for fluid logistics. Primary Australian Applications Commonly installed directly into centrifugal pumps, heavy-duty ball valves, chemical storage tanks, and agricultural irrigation headers. Key Performance Features · Flat Seating Surface: Precision-machined shoulder allows for flawless sealing when running into internal threaded ports or manifolds. · Heavy Hex/Ribbed Body: Integrated external flat sections provide a strong grip for pipe wrenches and spanners during installation torque. · Abrasion Resistant Groove: Hardened cam-groove boundary prevents indentation wear from repeated female handle lock clamping. · Universal Match: Adapts seamlessly to any standard Type B, C, D, or DC coupler in service. Technical Specifications · Working Pressure Capability: Up to 1,720 kPa (250 PSI) depending on diameter sizing. · Thermal Rating: Accommodates temperature variables between -20°C and +130°C. · Thread Spec: Tapered or parallel BSP male threads compatible with standard Australian plumbing fittings. · Material Base: Available in premium grades of Aluminium. Contact us <here> if you require stainless steel, brass, or other material options. The Polyplus Advantage Unlike low-tier fittings with cast threads that ..
$0.00 Ex Tax: $0.00
New
Camlock Type DP Dust Plug
Male Adapter End Plug The Polyplus Premium Camlock Type DP Dust Plug provides an immediate, highly effective barrier to seal off exposed female camlock couplers when lines are inactive. This male-profile plug inserts into a female coupler to block out environmental contaminants, moisture, and pests, maintaining line hygiene and safety. Primary Australian Applications Essential for transport tanker manifolds, seasonal agricultural sprayers, mobile bulk storage tanks, and dry material handling systems. Key Performance Features · Solid Core Casting: Designed as a single piece without internal bores to prevent any structural weakness or fluid bypass under line backpressure. · Integrated Lanyard Eyelet: Features a pre-cast heavy-duty eyelet hole for secure chain or cable attachment directly to the host equipment. · Corrosion-Defying Build: High resistance to atmospheric corrosion, harsh Australian UV rays, and salty coastal sea sprays. · Universal Coupling Fit: Matches every equivalent Mil-Spec style female coupler size perfectly. Technical Specifications · Pressure Integrity: Designed as a protective atmospheric dust barrier. (Not intended for high sustained pressure containment). · Sizes Stocked: Available in standard sizes from 20mm (3/4") through to 125mm (5"). · Structural Materials: Cast Aluminium. Contact us <here> if you require stainless steel, brass, or other material options. · Compliance Metric: Built according to global military specification alignment benchmarks. The Polyplus Advantage Polyplus Type DP du..
$0.00 Ex Tax: $0.00
